apk zippy

Here is something for those who'd like to reminisce about the days of NetWare! Back in 2003 I won a T-Shirt for these two tips on command lines for NetWare. They can still be found on Novell Cool Solutions. Of course no one is using NetWare any more but anyway, here they are for posterity :-)



Managing Trustee Directory Rights From the Command Line
The RIGHTS command (SYS:Public) has a parameter that's not easy to find documented anywhere.
RIGHTS /group=

For example:
RIGHTS SYS:Public ALL /group=power

('power' is the group object name, you can specify the context if you wish)




Adding Trustee Rights From the Command Line
From the DOS prompt type:
RIGHTS /name=

For example:
RIGHTS SYS:PUBLIC R F /name=.TEST.achmecorp

(TEST = container name)

Introduction
When working with NDS/eDirectory Replicas (NetWare 6.x) you need to have one that is the Master Replica. This is a flag but it's an important flag because it ensures at least one replica has the control, that if the synchronisation process is in doubt, it will use the objects/properties from the Master Replica.


Usually
Sometimes when you are upgrading or migrating to new hardware you may need to change the Master Replica to one on another server. Usually you can do this easily with DSREPAIR | Advanced options menu | Replica and partition operations | Designate this server as the new master replica server.


However...
I have found that sometimes this is not enough. After using DSREPAIR (as above) it appears as if the server's replica is the Master. But look on the other server, the one that used to be the Master. It is possible that it has not changed to Read/Write. In fact the designation of the new server to Master has not happened! It just didn't work. If you don't notice this you can get yourself into some more problems later - I am speaking from experience!


Solution
Instead of using DSREPAIR to change the Master flag, use ConsoleOne. You can run ConsoleOne on the server console - here's what to do:

Go to the server
Press Ctrl-Esc, 1-System Console
STARTX [Enter]
Click ConsoleOne (on the Novell menu)
Click View | Partition and Replica View
Click on the server object you want to set as Master
Right click and click Master
Wait... also you may need to close ConsoleOne and reopen it before it reappears correctly on the screen set to Master.


Conclusion
This is by no means the solution to all such situations. Of course you need to ensure your replicas are sychronised properly and use DSREPAIR to ensure there are no errors before you start. The best advice is to always check that an operation such as changing the Master designation, has actually worked. Even if it appears to have worked, look at it from a different angle or using a different tool (such as ConsoleOne or DSREPAIR on another server). Be sure you understand what is happening before you continue. Take your time and you should be fine - although that is good advice for everything to do with computers! ;-)

Using NetWare 6.5, in ConsoleOne, double click a user object and it shows the following error:
(Error -618) The server has detected an inconsistent database

Novell's support site has a page that might be helpful, click here.

If that advice doesn't help you (it didn't help me!) then restart the server! That solved it for me. After restarting the error didn't occur. But of course you should also ensure you run DSREPAIR until you get 0 (zero) errors.